DPF, which stands for Diesel Particulate Filter, is among the important parts for diesel cars. The purpose of diesel filters is to provide a clean air outlet by trapping the harmful particles coming from the engine before they exit the exhaust. The filter helps trap heavy metals that the catalytic converter part cannot do. Diesel Particulate Filter fills up over time as it keeps harmful substances in its internal filter.
What is DPF & Dpf Calibration
The Diesel Particulate Filter has a certain quota. As a result of trapping harmful particles, this quota is filled. Therefore, these filters need to be cleaned and emptied. In this way, the filter system can be used easily again. Cleaning the filters is possible with the developed diesel particulate filter regeneration. The installed generation filter is self-cleaning. The internal temperature of the Diesel Particulate Filter increases to around 650 degrees with this cleaning system. Thanks to this temperature, harmful substances, metals and particles are minimized and then discarded.
Exhaust gases caused by heavy traffic in the city prevent diesel particulate filter regeneration from reaching sufficient heat. The filter cannot clean itself due to the inability to accelerate continuously and the temperature not increasing, and thus leads to clogging in a short time. In order for your vehicle to perform more comfortably, the diesel particulate filter must be canceled.
How to Cancel DPF?
In order to be able to calibrate the diesel particulate filter, the characteristics of the vehicle must be checked. In some vehicles, it can be easily connected to the vehicle from the socket by using the socket called OBD2 without the need to disassemble the computer. In some vehicles, because the OBD2 socket is different or the device cannot read, it is necessary to disconnect the computer and establish a connection. At this point, removing or not removing the vehicle's computer does not create a disadvantageous situation. The general purpose of dismantling the brain is to reset the margin of error and to perform safer operation. Potential error codes are detected and electronic checks are made with devices suitable for the vehicle model. After this process, which generally takes an average of 1 hour, the software is edited and updated. The DPF is dismounted, emptied, reassembled or a line is drawn according to the requested model. The edited software shows the vehicle brain as if the DPF is working properly and the installation is completed. Thus, DPF cancellation is made.
Does DPF Pass Inspection After Cancellation?
If the above-mentioned process is done by a professional company, you can pass the 100% inspection without any problems and it will not cause any damage to your vehicle.
Where Can I Get DPF Cancellation?
You can get the Nero Performance software implemented by our company guaranteed.
You can contact and get information from our WhatsApp support line.
Comments