SCANIA coordinator COO7 read/write in JTAG/DC/OBD mode.

Read/write of:
- MPC Microprocessor Controller MPC5554 (Flash)  (JTAG/DC/OBD)
- EEPROM 95256  (JTAG only)

All operations are done on a bench.
For DC/OBD mode no need to disassemble ECU.
For JTAG mode need to disassemble ECU!!! Need for additional wires!!!

Manual how to connect you will find at https://my.autovei.com

Read in JTAG mode FLASH and EEPROM procedure takes ~20 min.
 
 
Needed for JTAG:
- VEI V6 tool
- Software version greater than v6.17
- DC2U tool
- DC2-COO7 cable
- DC2U-ISP-JTAG+BDM dongle
- DC2U-JTAG8 open flex cable

Operation available from software v6.17 (build 14097) for JTAG mode
Operation available from software v7.20 (build 18834) for DC/OBD mode